• 网站首页联系我们EN

    今创集团股份有限公司

    今创船舶

    KTK Marine

    交钥匙解决方案提供商

    Turnkey Solution Provider

    今创船舶文化

    KTK Marine Culture



    介绍

    Introduction



    研究与开发

    R&D


    设计

    Engineering

    • 船舶工程总包设计
      船舶及岸外舱室工程及商务支持

      ■ 轮廓参数,舱室布置,预算等。基本设计以及详细设计(所有认可图纸)
      ■ 舱室布置深化设计,3D效果图设计,以及相关设计内容。
      ■ 所有基本设计和详细设计,包括施工流程和其他技术要求均满足 按船东和船级社要求。生产设计(按3D模型)。
      ■ 船体生产图(落料、结构、装配、检测、放样等)。
      ■ 船体管路、机舱管路。
      ■ 船体外舾装、机舱外舾装。
      ■ 舱室外舾装。
      ■ 电气设备及电气舾装。
      ■ 材料及制造相关信息。


      Total Ship Design & Marine Engineering
      Ship/Offshore Marketing Engineering & Business Support for Accommodation

      ■ Outline Spec, Preliminary Cabin Layout , Cost Estimation, etc. Basic and Detail Design (All kinds of Drawings for Classification & Approval)
      ■ Develop Cabin Plan, 3D Perspective Design, Related to detail design etc.
      ■ All kinds of Basic and Detail Drawings including Diagrams and other Technical Documentations for Owner’s / Class’ Approval. Production Design (by 3D Modeling)
      ■ Hull Production Drawings (for Cutting, Forming, Assembly, Remarking, Template, etc.)
      ■ Hull Piping, Engine Room Piping.
      ■ Hull Outfitting, Engine Room Outfitting.
      ■ Accommodation Outfitting.
      ■ Electrical / Electronic Equipment & Outfitting.
      ■ Material & Production related Information (BOM, PML, Control of Scrap Ratio & Leftover Steel Plates, etc.


    • 采购咨询
      造船管理

      ■ 研发设计/过程预览
      ■ 愿景与战略
      ■ 供应商选择
      ■ 工程管理
      相关文件准备(PFQ,TBE & POS)
      ■ 质量管理
      ■ 性能评估
      ■ 销售和市场策略


      Procurment Consulting
      Shipbuilding Management


      ■ R+D/Process Review
      ■ Vision & Strategy
      ■ Selection of Vendor
      ■ Management of Engineering
      ■ Preparation of related to document such as PFQ, TBE & POS
      ■ Quality Management
      ■ Performance Evaluation
      ■ Sales & Marketing Strategy


    业务模式

    Business Model

    业务单元

    Business Unit

    市场细分

    Market Segment

    • 邮轮及客滚船

      Cruise & Ropax


    • 游艇及公务艇

      Yacht & Service Boat



    • 特种船

      Special Ship Ship


    关联公司及子公司

    Associate & Subsidiary

    项目

    Projects

    • 从事各种类型的船舶和岸外项目


      ■ 充分的内部资源,完整的打包,专业项目经理的管理
      ■ 承包范围从小型承包到数百万美元的大型项目。
      ■ 符合国际设计标准包括ISO,ASHRAE,CIBSE和NORSOK。
      ■ 成功的项目业绩。


      工程和设计


      从电脑设计开始,我们的项目服务包括概念设计,生产详细设计,工程图纸,计 算,安装施工,相关文件和证书提交。


      Execute all types of marine & offshore projects.


      ■ Fully resourced in-house – provide a complete EPIC package, managed by dedicated Project Managers.
      ■ Scope ranges from small turnkey packages to multi-million-dollar upgrades and new builds.
      ■ Complies to international design standards including ISO, ASHRAE, CIBSE and NORSOK.
      ■ Have a track record of executing projects with great success.


      Engineering & Designs


      Starting at the station our project service ranges from conceptual design to the production of detailed plans, engineering drawings, calculations, construction work packs, related documentation and certification packs.

    • 项目工作计划


      为确保我们可以为客户提供一个安全、高效、节约的交钥匙解决方案,我们运 用了可靠的工作计划制度:

      ■ 指定项目经理
      ■ 明确工作范围和职责
      ■ 如果需要,进行现场调查
      ■ 与客户明确工作范围和工程概念
      ■ 把握设计基础、时间尺度和成本控制
      ■ 客户审查和通过
      ■ 生产、安装和调试
      ■ 客户审查,开闭幕会议


      Project Work Plan


      To ensure we provide our clients with the a safe, efficient, and cost effective turnkey solution, we apply a tried and trusted work plan regime:

      ■ Designate Project Manager.
      ■ Agree work scope and responsibilities.
      ■ Conduct site survey, if required.
      ■ Verify work scope and agree engineering concept with client.
      ■ Present basis of design, time scales, and costs.
      ■ Client review and approval.
      ■ Manufacture, Install and Commission.
      ■ Review and close out meeting with client.


    • 典型的内装解决方案

      Typical Accommodation Turnkey Solution


      甲板方案

      Deck Plan


      总长:约83.4米
      垂线间长:76.5米
      浮长:79.6米
      型宽:18.0米
      型深:8.0米
      结构吃水:6.7米
      设计吃水:6.0米
      干舷结构吃水:1.4米



    • 要求

      Requirements



    • 概念设计:颜色和材质

      Colour & Matrial Concept



    • 说明

      Description


    产品

    Products

    • 舱室单元

      Unit Cabin


      优点
      减少建造周期(比常规减少20%)
      ■ 交付时可矫正
      ■ 减少设计时间
      ■ 大幅减少安装劳力
      ■ 统一和简化采购项目
      ■ 易于工作管理
      ■ 舱室模块保证同等装配质量
      ■ 将工作干扰降至最低
      ■ 通过工厂检验防止流程延误
      ■ 无材料损失


      ADVANTAGES
      Reduction of a period of construction (20% compared to BUILT-IN)
      ■ Level-off of LOAD at the stage of DELIVERY
      ■ Reduction of man hour for designing
      ■ Dramatic reduction of manpower for installation
      ■ Unification and simplication of purchasing items
      ■ Easy for work management
      ■ Maintain the same quality from MOCK-UP to the completion of CABIN
      ■ Minimize interference work in process
      ■ prevent process delay through a factory inspection in advance
      ■ Material LOSS is nonexsist


      缺点
      需要合适的船体开孔
      ■ 采用柱体结构(提高舱室移动和安装效率)
      ■ 只有风管安装在舱室顶部,其他公共管线安装在 过道顶部。
      ■ 需要清除甲板表面凸出物。


      DISADVANTAGES
      Require suitable hull structure OPENING
      ■ Apply PILLAR structure (movement of CABIN and installation efficiency)
      ■ Only AIR DUCT is placed on upper CABIN and other UTILITY LINE(CABLE,PIPIE AND ETC.) are placed at corridor.
      ■ Exclusion of protrusion on upper DECK.

    主要客户

    Main Clients

    项目业绩

    Project Reference

    服务

    Services

    • 我们仅有一个电话之隔

      We are just a phone call away!

      作为全球海事与岸外领先的供应商,今创船舶明白一流 售后服务的重要性。公司从地区总部新加坡提供售后支持,其中包括:调试;操作员培训;检测;状况报告;服务;维修;转换和升级(改造);备用配件

      As a leading global supplier in Marine & Offshore industry, KTK Marine understands the importance of top-notch after sales services. The Company offers it's after-sales supports from its regional head-quarter in Singapore that includes: Commissioning; Operator training; Inspections; Condition reports; Service; Repairs; Conversions and Upgrades (Retrofit); Spare parts

    版权所有 ©2018 今创集团股份有限公司 版权声明 苏ICP备17061335号 技术支持:江苏东网科技 [网站管理]
    Top